UL 508A | INDUSTRIAL CONTROL PANELS
YunSen UL 508A industrial control panels integrate power, control, automation, protection, and operator interfaces for machinery, process systems, packaged equipment, utilities, and building services.
-
Core Capabilities
-
YunSen UL 508A industrial control panels integrate power, control, automation, protection, and operator interfaces for machinery, process systems, packaged equipment, utilities, and building services. They can be custombuilt or utilize a standard configuration to meet specific dimensional, control and protection requirements. Fullyintegrated component selections from leading manufacturers are available. Indoor and outdoor enclosures are offered with multiple durable coating options.
-
Full Customization and Design Flexibility Component and HMI Selection Options SCCR Calculated & Marked Per UL508A Supplement SB.
-
Seismic Tested to Worst Case Response Spectrum.
-
Indoor and Outdoor Applications UL or cUL Listed; Meets NEC, ANSI, and CSA Standards.
-
-
-
Single-Phase Pad-Mounted Transformer
Benefits
Voltage Up to 1000VAC, Up to 1000VDC maximu
Ampacity - Custom circuit ratings based on selected components
ShortCircuit Current Rating up to 100kAICdepending on assembly design
NEMA Type 1, 12, 3R, 4, 4X enclosures
Paint ANSI 61 – Standard, other colors, stainlesssteel or aluminum enclosures available as options
Devices can bearranged for vertical or horizontal layout for motors, drives, PLC and HMI assemblies
Custom sheet metal layout for control power transformer, cable entry and wiring compartment flexibility
Extensive control and protective device accessories available
Compliant wiring spacing, clearances and marking following NEC Article 409
Assemblies fully shortcircuit tested per UL508A requirements
Rigid frame construction isolating power components from enclosure shell
Control and metering compartments built to project and utility requirements
Variety of fully integrated component options including motor contactors, softstarters, VFD, PLC, HMI, pushbuttons, SPD, remote communication for automation, metering and monitoring
Panel fed via cable or cable gland entries
Fixedmount disconnects, circuit breakers and fusible disconnect switches
Thermalmagnetic breakers, electronic protective devices with standard or high SCCR capability, 80% or 100% rated
All commercially available ULrecognized / UL Listed components for controlpanel assemblies
Seismic qualified assemblies tested to worstcase response spectrum
Support industrial communication protocols: ModbusRTU, ModbusTCP, EtherNet/IP for remote monitoring
Valueengineered component selections optimized for project specifications
Technical Specifications
SCCR calculated, documented and marked in compliance with UL 508A Supplement SB.Seismic tested per IEEE344 and ICC-ES-AC156 with suitably rated assembly construction.Powdercoated enclosures with enhanced saltspray resistance performance.
YunSen DIfference
SCCR evaluation performed for the full assembled panel, not only individual components .Seismic-qualified panel assemblies available for critical installations - Enclosures built for application.Specific dimensions with advanced powder-coating finishing exceeding standard salt-spray requirements .Component and operator-interface selections based on value-engineering for each application and optimized to meet project specifications.
YunSen UL508A Industrial Control Panels meet or exceed applicable industry standards, including UL508A, NFPA-70(NEC), CSA C22.2. Utilizes UL-recognized and UL-listed industrial control components. YunSen UL508A assemblies meet seismic testing, circuit requirements as outlined by IEEE344 and ICC-ES-AC156. outlined by IEEE344 and ICC-ES-AC156.
Dedicated Engineering Support
Powering high-load applications requires precise planning. Send your exact single-line diagram (SLD) to our heavy-power engineering team so we can confirm breaker coordination and compliance requirements.
Our team will respond within 24 hours.